Buying guide

Land Measurement in Uttarakhand Nali, Gaj and Conversion Guide

Aniket Kumar· Content Writer· Nov 13, 2026· 4 min read· Updated Nov 15, 2026
land measurement in Uttarakhand
On this page+
  1. Why Land Measurement in Uttarakhand Confuses Buyers
  2. Quick Conversion Table for Uttarakhand Land Units
  3. Hill Units: Nali, Mutthi and Gaj
  4. Plains Units: Bigha, Biswa and Biswansi
  5. The Government Land Measurement Scale in Uttarakhand
  6. How to Verify Land Area Before You Buy

Land in Uttarakhand is measured using two different systems, and confusing the two is how buyers end up paying more than they should. The hills use the Nali, while the plains use the Bigha and Biswa. On top of that, the government records every plot in metric units, hectares and square metres. So before you trust a seller's figure, you need to know which unit you are hearing and what it equals in square feet.

This guide gives you the clean conversions, a quick-reference table, and the one check that settles any dispute. We have kept it short and to the point.

Why Land Measurement in Uttarakhand Confuses Buyers

The confusion comes from region and custom, because the land measurement units in Uttarakhand split along the map. In the hill districts of Kumaon and Garhwal, land is measured in Nali and its sub-unit, the Mutthi. In the plains of the Terai, like Udham Singh Nagar and Haridwar, the Bigha and Biswa take over. Neither is fixed by law, so the same word can mean different areas in two districts.

That is why the Bigha trips up almost everyone. A hill Bigha, loosely 20 Nali, is far larger than a plains Bigha. And a plains Bigha comes in a bigger "pucca" and a smaller "kaccha" version. So the safe rule is simple: never buy on the local unit alone. Match it to the square-foot figure and to the hectare value on the government record, which we cover below.

Quick Conversion Table for Uttarakhand Land Units

Here are the answers people look up again and again, gathered in one place:

ConversionValue
1 Nali in Uttarakhand2,160 sq ft (240 gaj)
1 Nali in square feet2,160 sq ft
1 Bigha in square feet in Uttarakhandabout 27,000 sq ft (plains, pucca)
1 Bigha in Uttarakhand20 Biswa or about 3,000 gaj
Ek bigha mein kitna hectare hota hai (how many hectares in 1 bigha)about 0.25 hectare
1 Acre43,560 sq ft
1 Hectare107,639 sq ft (2.47 acres)

These are the common Uttarakhand values. The Nali figure is steady across Kumaon, while the Bigha and Biswa shift by region, so treat those as a guide and verify locally.

Hill Units: Nali, Mutthi and Gaj

The Nali is the main unit across the Uttarakhand hills. Here is how it breaks down:

  • 1 Nali = 2,160 sq ft, which is the Kumaon standard. In parts of Garhwal it ranges from about 2,025 to 2,250 sq ft.
  • Nali to gaj: 1 Nali = 240 gaj, since 1 gaj is 1 square yard, or 9 sq ft.
  • 1 Nali = 16 Mutthi, so 1 Mutthi is 135 sq ft.

So if a seller in Nainital or Almora quotes a rate per Nali, multiply by 2,160 to get the square feet, then compare. That one step stops needless overpaying in the hills.

Plains Units: Bigha, Biswa and Biswansi

In the Terai plains, the Bigha and Biswa rule, and they form a neat chain:

  • 1 Bigha = 20 Biswa, so biswa to bigha is a simple one-twentieth.
  • Biswa to gaj: 1 Biswa is about 150 gaj, or roughly 1,350 sq ft, in the common pucca scale.
  • 5 biswa in gaj: 5 Biswa works out to about 750 gaj, or close to 6,750 sq ft, which answers how to measure 5 bissa land in Uttarakhand on the pucca scale.
  • 1 Biswa = 20 Biswansi, the smallest sub-unit you will meet.

One warning holds here. The plains Bigha has a larger pucca form and a smaller kaccha form in certain areas, so a Bigha in one tehsil can differ from the next. Always confirm which version the seller means.

The Government Land Measurement Scale in Uttarakhand

Here is the part that settles every argument. The official records do not use Nali or Bigha. The government measurement of land in Uttarakhand is metric, so the khatauni and the registry record each plot in hectares and square metres.

  • 1 Hectare = 10,000 square metres = 107,639 sq ft = 2.47 acres.
  • 1 Acre = 43,560 sq ft = 4,840 gaj = about 0.405 hectare.
  • 1 square metre = 10.76 sq ft.

So whatever local unit a seller quotes, the government land measurement scale in Uttarakhand is the hectare figure on the record. Convert the Nali or Bigha to square metres and match it to that figure. If the two do not agree, you stop and ask why.

How to Verify Land Area Before You Buy

Reading the record is the real protection. Pull the plot's khatauni on the Bhulekh Uttarakhand portal and note the area it states in hectares, then convert the seller's local unit and check that the two match. Our guide to buying land in Uttarakhand walks through the wider checks, and the rules on how much you can hold are set out in our Uttarakhand land laws guide.

If the unit maths feels like a headache, there is a simpler path. A documented villa lists its area in square feet on clean papers, so you skip the guesswork entirely. Janjaes Infra's homes, such as a villa for sale in Jim Corbett or a Privemont villa in Nainital, come with the area and title set out before sale.

Frequently asked questions

How much land can a person buy in Uttarakhand?+

Under the 2025 state law, a buyer from outside Uttarakhand can hold only one residential plot of up to 250 square metres in rural areas and cannot buy farm land. Residents and purchases inside municipal limits face fewer limits. Our guide on whether outsiders can buy a villa in Uttarakhand explains the cap.

What are the units of measurement for land in India?+

The standard units are the square foot, square yard (gaj), square metre, acre and hectare. Alongside these, regions use local units like Bigha, Biswa, Nali, Marla, Kanal, Cent and Ground, which is why conversion matters.

How much is 1 acre in Uttarakhand?+

One acre equals 43,560 sq ft, or 4,840 gaj, or about 0.405 hectare. In hill terms that is roughly 20 Nali, and in the plains about 1.6 Bigha on the pucca scale.

What is 1 Nali in square feet?+

One Nali equals 2,160 square feet, or 240 gaj, in the Kumaon standard. In certain Garhwal districts it ranges from about 2,025 to 2,250 square feet.

How do you convert Biswa to Bigha?+

Twenty Biswa make one Bigha, so one Biswa is one-twentieth of a Bigha. On the common pucca scale, that puts one Biswa at about 1,350 square feet.

Share
Prefer a quick chat?

Message the Janjaes Infra team on WhatsApp for instant answers.

WhatsApp us

Related articles

All articles →